Important:
This boat is taller than the standard workbench it can be spawned in via a mission or a custom workbench.
This sailboat is about as easy to use as is possible in stormworks.
It is most effective between 20% and 60% wind, but be careful of the waves in higher winds. Incase the wind or waves are too high its possible to ue only 1 of the 2 jibs for more control but at lower speed.
Under optimal conditions and sail coniguration it is possible to reach up to 13 M/s.
Next to the left hatch is a key to open all outside hatches which give you access to the electrical systems
I'm a very good sailor but I'm terrible at explaining how to sail, here is my crude guide: tightening the main sail results in the front wanting to point towards the wind, tightening the jib(s) (front sails) results in the stern wanting to point towards the wind. Once you get to a certain point facing away from the wind you can loosen the jib again to catch more wind, staying on course is a balancing act between those 2, in theory you shouldn't need the rudder at all.
Example: if you want to go with the wind tighten the jib and loosen the main sail then loosen the jib(s) again, if you want to go towards the wind loosen the jib(s) and tighten the main sail
I wish you best of luck, this Boat may be easy to use but sailing itself is another story.
Please note that there are some minor things I did not make myself, I do not claim any credit for these parts or decorations
