Specs
- Price: 38.296$
- Weight: 4.147kg
- Engine: Supercharged 12 Cylinder
- Transmission: Manual 10 Speed (8 Forward, 2 Reverse)
- Drivetrain: 8x8
- Fuel Capacity: 700L
- Top Speed: 122km/h
- Suspension: on all wheels
Features
- Loading crane
- Hook lift for container transport
- Custom containers utilizing the hook lift design in a Pack on my workshop available
- Air Brakes
- 10 Speed H Shifter
- Cruise control
- 2 Seats
- Cab suspension
- Cab heater
- 3 Colour connector (lights, brake control and air supply)
- Tiltable cab for easy repair access
- Dimmable interior lights (beige/green)
- US-lights/indicators
- No moded blocks
- Horn
- Low airpressure and lights on with door open warning beep
- Reverse warning beep
- H4 UniCon Connectors underneath to load the truck on a Ship/Train/Lowbed
- Odometer https://steamcommunity.com/sharedfiles/filedetails/?id=1583181472
- Steering stabilizer https://steamcommunity.com/sharedfiles/filedetails/?id=2470357987
Instructions
Turn on breaker right behind the cab.
Start engine with the key and release handbrake in the center console.
Wait for air pressure to reach 40 for the brakes to release and the alarm to stop.
Shift gears with 3 and 2 (mapped to shift with number buttons on the mouse, sorry if you don't have any).
Be carefull on rough terrain and steep inclines, due to the suspension the truck will bottom out and burst in flames.
I recommend setting the cruise control to 80 on sawyer, keeps the truck controlable and the suspension can handle most of the roads safely.
When the truck is left parked for a long time in carreer mode, switch the breaker back off, the automatic heater will drain the battery otherwise. Next to the breaker is a direct battery connector to charge the battery or start the truck with a dead battery.
If you want to load the truck onto anything with the H4 connectors underneath, enable them with the button on the chassis behind the cab.
Incase you crash or damage the front of the truck, keep an eye on the engine temperature, if it rises to 90° Stop and replace radiator hoses.
The hook lift is controled by the handle on the outside, it has its own breaker you should shut off while not in use to prevent physics glitches and it draining the battery.
Hook lift Instructions
The hook lift is controled by the handle on the outside, it has its own breaker you should shut off while not in use to prevent physics glitches and it draining the battery.
The lift has to be spawned folded due to the crane taking up the space, simply fold the crane and go through a container loading motion, the hook will unfold and lock in place.
The flatbed container on the pictures: https://steamcommunity.com/sharedfiles/filedetails/?id=3434227884
Crane Instructions
Pictures describing this process are included above.
The crane spawns unfolded and has to be manually folded, first turn on the breaker (yellow) next to the crane base.
Lift it off the truck, fully retract the extention, lift the main boom straight up to fold the extending boom all the way down, then rotate until the connectors on the passenger side of the truck and crane line up and fold the main boom.
The connecors will lock once you leave the control handle, turn off the breaker and connect the boom rope anchor with the one on the chassis below it (the boom will slide around during driving if this is forgotten)
Leave the engine running during crane operation since it drains the battery.
Changelog
Added 24.04.25
- Pneumatic piston lift system to load the drawbar trailer.
Added 27.04.25
- Pressing the Reset button on the odometer quickly now switches to the trip reading, you can no longer reset the whole odo.
- Increased the generator output with one more gearbox
- Improved ECU to lower minimal battery charge to start the engine
Added 15.07.25
- Improved generator clutch engagement and added raised engine idle under 95% battery
Have Fun
