Ради вашего удобства наш сайт использует cookies! Узнать больше! Мы используем cookies

AC6000CW | WNYP 6001

Recreation of the Western New York and Pennsylvania Railroad 6001.


Instructions

STARTUP (watch the video or read this)
1. On the rear panel in the cab turn on all of the buttons excluding "Engine Run/Stop".
2. Below the Engineers panel turn on "Generator Field", "Cab Lights", and "Backlights". You can use "Maintenance Lights", "Heater", and "AC" to your own discretion.
3. Go back to the rear panel and hold down "Engine Run" for about 5 seconds.
(ensure "Lead Unit" is on or the brakes will not work)

SHUTDOWN
There are multiple ways to shutdown the engine of the train.
- Tap the "Engine Stop" button once when engine is on.
- On the exterior of the train, on top of the fuel tanks (both sides), there are "Emergency Fuel Shut-off" switches. Hold down the switch for roughly 2-4 seconds, after about a moment the engine should shutoff.

Multiple Unit (MU) System
- In order to use the MU system, which is LTTCC, you need to hook any locomotives or railcars in your consist up by the electrical cable anchors found on each end of the locomotive. (you can find the cable in the electrical bay.) Once you have hooked up the railcars/locomotives you need to activate the "Lead Unit" button in the locomotive you will be controlling.
- As far as my knowledge goes, LTTCC is not compatible with any other MU/Slave system.

Other Functions & Notes
- "Emergency Brake Valve" located on the conductors panel and the "EOTD Emergency" located on the engineers panel will, once pressed, activate brakes for the train/consist. Only difference being that EOTD is for the entire conist, while the brake valve is for the locomotive only.
- The "Electrical Bay" stores a cable for the slave system and a welding torch for repair efforts, as well as ability to turn on the "Infinite Electricity Override".
- The speedometer has been edited by Train Master to be able to be clicked and automatically convert from mph to kph and vice versa.
- Turning on infinite electricity via the game settings does create issues with several systems of the locomotive. There is an alerter that will beep until infinite electricity is turned off or the alerter is ignored via the electrical bay.

IMPORTANT NOTICE:

This locomotive is strictly not compatible with Infinite Fuel as the engine will turn off when it is on.


Changelogs

- April 7th, 2025 - Uploaded this workshop creation.

- October 25th
Switched model from AC44 to AC60 for accuracy
Updated livery


Stats

#

Mass

16,797

Cost

$268,359

Fuel Capacity

11,339

Max Speed

71mph/114kph


Credits

Creator of the locomotive - Mr_ThomasTheCat

Assisted in creation of the locomotive - Train Master

Linked Train and Train Car Control Unit (LTTCC) Microcontroller - Train Master 23

Digital Speedometer Conversion Edit - Train Master

Consumption 1x1 by Krimwand - krimwand

1x1 Configurable Digital Speedometer - Speyguy

Weather Screen 1x1 - Mr Lennyn

Infinite Electricity Pump - pressF and freeman

ZE Modular Engine Controller - Uran_Wind

EOS American Locomotive Truck Preset Pack