Use this MC to adjust the default settings of the Remote Control.
How to use:
Connect an antenna to the Composite In and set the antenna frequency to your desired Remote Control Channel (0-9).
In the MC settings you can change the 4 Axis (AD,WS,UD,LR) to Sticky or Reset, and adjust the sensitivity just like a regular seat.
You can also change Hotkeys 1-6 to be in push mode rather than toggle. This is a work-around solution and there are some problems. The push function does not work when held down. To simulate that, rapidly press the hotkey button over and over until you wish to stop. Additionally, when in Push Mode, if the internal state is "On", then when disconnecting the Remote and Reconnecting, you will get a pulse on those Hotkeys.
If anyone has a suggestion to avoid the pulse effect, please let me know.
My first useful MC that I don't think has been implemented like this on the workshop as far as I can find. I know the remote is not used very often, but the reason I developed this solution was to use it in confined builds when sitting on the padded seat. If you use this in your builds, please give a friendly credit and let me know if there are any questions.
