Aerosyn A500 / Cargo plane
Hi,
This aircraft was inspired by the C5 Galaxy, but I didn't want it to be exactly like it.
Due to its size, it cannot be spawned on any workbench. So you either install it as an add-on. Or for example, the link below will help you on how to modify the workbench:
[url=https://www.youtube.com/watch?v=gqMOIZ6H7t8]https://www.youtube.com/watch?v=gqMOIZ6H7t8[/url]
=======================================================
Some instructions for use:
-If you want to load at the nose. Open the nose, then set the height to low, then open the ramp.
-If the personal door is open, these cannot be used.
-the ladder leading to the cockpit is a bit tricky. It's a good idea to press the shift key while climbing, and then grab hold of it again when you're halfway up.
-To start the engines, you turn the key and then turn on the engines using the switches located above your head.
-Controls are the usual WASD, Left/Right. The up and down arrows can be used to adjust the angle of the large wings. The indicator for this is next to the monitor. It helps to change the angle of inclination when landing.
-The plane has automatic altitude hold and heading control. These are automatically activated, but turn off at any change of direction, then turn back on when the control is 0.
-Landing assist turns off automatic altitude hold and brakes the wheels when the distance from the ground is 0. It also retracts the lever.
=======================================================
Some information about the plane:
Cost: 313000$
Mass: 63600
Fuel: 122000l (JetFuel)
Lenght: 70.25m
Height: 22.5
Wingspan: 81.25
Cargo hold entrance: 5.25*5.75m
=======================================================
Thank you for watching :)
I translated this text with Google Translate. Sorry for any mistakes!
-- r10tocsi --
