4-Axle AWD Semi Truck
Overview
A four axle, all-wheel-driven semi truck, for towing saddle trailers (SIBTaT compatible).
Price: $ 39'190.-
Features
The truck features a medium engine, manual gearbox with 8 gears, reverse and low gear. Reverse camera and light, a distance warner and working side mirrors. An acoustic warning sounds to warn bystanders when the truck is backing up. Yellow caution lights and a heavy truck horn round this package up.
It features a dynamic steering system with the two front axles steered. Steering angle depends on speed, so it drives fairly stable even at high speeds.
The cab contains a bed for overnight stays, a regulated heater, transponder locator and a variety of equipment like warm clothing, fire extinguishers, torches, cables, ropes and hoses.
The passanger seat has a plugin NFT interface, able to control NFT systems connected to the winch (e.g. Rescue Container, Fire Fighting Container, SAM Container, etc.)
The aft cab is equipted with a winch, which can be used for towing or recovery and contains the NFT link.
It's also equiped with a lane-hold functionality: Eases driving on train tracks due to their side walls. But keep an eye on speed and payload. Lane-hold tends to oscillate at high speeds or heavy payloads or both.
Besides a saddle coupling, it also features a standard trailer connector. Keep in mind to disable one of both in the cab when connecting a trailer (saddle or tow bar) to avoid interference!
Both connectors feature SIBTaT standard.
Specs
Mass (empty)
1'981
Cost
$ 39'190.-
Tank capacity (Diesel)
910 L
Milage
~2 L/km
Range
~600 km
Top Speed
up to 220 km/h
Minimum Workbench Size
Trainyard
Operation
Start-Up
- Ignition ON
- Start engine
- Release Parking Brake (6) - Make sure blue "P" indicator is off.
- Shift gear up (3) or down (2) as requiered
- Throttle (W) or brake (S) accordingly
NOTE:
Engine Overheat Lamp (OVHT) may illuminate for short periods, indicating activation of cooling fan. If light stays on permanently, monitor engine temperature carefully!
Usage of Lane Hold
- Start up and load cargo as requiered
- Center truck on rail lanes and make sure walls left and right are high enough
- Activate Lane-Hold and adjust vehicle speed, so no oscillation occurs.
CAUTION!
Take care in tight turns!
Related Content
Container trailer:
https://steamcommunity.com/sharedfiles/filedetails/?id=2894166196
Uses my Fuel Display:
https://steamcommunity.com/sharedfiles/filedetails/?id=2841555616
