To use, simply connect composite input to the composite output on the instrument panel. From here, use each channel for each on/off input accordingly. For example, you could make a light switch on the instrument panel, make the switch so its set to Channel 1, then attach the channel 1 on/off of this microcontroller to the lights you want to turn on/off. If you need more channels, such as 5-8, simply go to the logic of this microcontroller, then change the channels of the composite reads.
Reminder: This is for on/off switches, this microcontroller won't work with number inputs/outputs in it's normal state. To switch one of the on/off modules for a number, firstly go to the logic (In The Design Tab), and switch one of the on/off outputs for a number output. Then, go to the Logic Tab, and find the on/off composite read that connected to that number output, switch it out for a number composite read, set the number composite read to the channel required, connect it's composite signal to the instrument panel signal, and connect the composite read's number output to your number output.
