Engine Information
- Supercharger mode and Turbocharger mode can be switched
- The cooling system operates only when the engine temperature is higher than the radiator temperature
- Fuel Supercharger Maximum Boost Pressure: 60 Atm
- Air Supercharger Maximum Boost Pressure: 59.7 Atm
- RPS required to achieve maximum boost pressure: 7.5 RPS
When starting the engine during a power outage. Or when the starter output is insufficient.
- Turn off the clutch flip switch
- Turn off the circuit breaker.(Breaker Name: Generator Clutch Bus tie)
- Turn on the engine ignition(Flip Switch Name: ENG IGN)
- Turn the torque crank(Torque Crank Name: APU Starter)
- When the auxiliary engine activates, the generator will start. Once the button becomes operable, set the main engine RPS to 10 or higher.
- If the engine starts successfully_________________________
- ...Change the main engine clutch to any desired value
- ...Turn on the circuit breaker.(Breaker Name: Generator Clutch Bus tie)
- ...Restore the battery's power
- If the engine starts unsuccessfully_________________________
- ...Check if the device is broken and repair it if it is.
- ...Please check if there is diesel fuel.
Color-Specific Functions
- Orange: Fuel
- Green: Supercharger
- Yellow: Electrical System
- Light Blue: Air
- Blue: Cooling Device
- Brown: Exhaust
- Red: Auxiliary Equipment
- The stoichiometric value is set to 0 by default.
If you wish to change it, modify the stoichiometric value in the ECU. - There is no fuel tank, so please install one yourself.
