[b]AeroCraft D4 – Light Utility Taildragger[/b]
The AeroCraft D4 is a simple, reliable light aircraft built for general flying and short-field operations. Its tail dragger configuration makes it well suited for rough or small runways, while the 6-cylinder 1x1 engine provides steady, efficient performance. The 187.5-litre diesel tank offers solid range for routine missions.
[b]Specs:[/b]
6-Cylinder 1x1 Engine
Tail Dragger Configuration
187.5 L Diesel Fuel Tank
[b]Start Sequence:[/b]
1. Open pilot door (no other doors will open due to electrical limits)
2. Turn "Master Battery" to the ON position & close pilot door
3. Turn "Avionics Bus 1" & "Avionics Bus 2" to the ON position
4. Tune radio to appropriate frequency
5. Turn "Nav Lights" to the ON position
6. Turn "Strobe & Beacon" to the ON position
7. Start Engine via the "Engine" switch
7a. Engine should idle around 6 RPS
7b. Refer to door card for more engine information
8. Set flaps via the "Flaps" lever
9. Turn "Taxi Lights" to the ON position
