AeroCraft D4F – Float Plane Variant
The AeroCraft D4F is the float-equipped version of the reliable D4, built for water operations and remote access. Its stable design and efficient 6-cylinder 1x1 engine make it ideal for lakes, rivers, and coastal missions where runways aren’t available.
Specs:
- 6-Cylinder 1x1 Engine
- Twin Float Configuration
- 187 L Diesel Fuel Tank
Start Sequence:
1. Open pilot door (no other doors will open due to electrical limits)
2. Turn "Master Battery" to the ON position & close pilot door
3. Turn "Avionics Bus 1" & "Avionics Bus 2" to the ON position
4. Tune radio to appropriate frequency
5. Turn "Nav Lights" to the ON position
6. Turn "Strobe & Beacon" to the ON position
7. Start Engine via the "Engine" switch
7a. Engine should idle around 6 RPS
7b. Refer to door card for more engine information
8. Set flaps via the "Flaps" lever
9. Turn "Taxi Lights" to the ON position
