NZR DSG Class Shunter (TCP Compatible)
Changelog: Removed a couple unneeded TCP modules and improved performance and efficiency (engine throttle is now tied to battery charge)
This is a simple shunter based off of the DSG class shunter locomotive that runs on NZ rails
INTERIOR IS NOT ACCURATE AND I DON'T PLAN TO MAKE IT ACCURATE
Features:
2-way operation with controls at both ends of the cab
Touchscreen radio ( [url=https://steamcommunity.com/sharedfiles/filedetails/?id=2015565502]https://steamcommunity.com/sharedfiles/filedetails/?id=2015565502[/url] )
Directional headlights
Red/white interior light
TCP multi-unit operation (allows multiple locos to operate together)
Clock
2 storage compartments
Good fuel economy
Top speed: 65 KM/H
Startup instructions
1. check that there's enough fuel in the tank
2. turn on the battery cut-out switch
3. get into the cab and turn on the engine
4. make sure the locomotive is master and apply throttle
To control another locomotive
1. Spawn both locomotives, if there are cars in between they have to either pass through composite on the coupling (has to be loco's lower coupling) or they must support TCP
2. connect both locomotives
3. ensure that the loco in front has master, if not, re-request it
4. You should be good to go
Due to how this is set up, the throttle will cut off at 0.1 and if you go further down, it will toggle reverse, then throttle up as usual
