Mag all connected output to composite converter
This little logic microcontroller doohickey converts the output from the Mag all to a composite signal, so it can be carried through the winch to the ship using the composite connections.
To use this you need to:
1. Place the microcontroller on the Mag all and connect the Mag all "Connected" output into the controller
2. Connect the composite output through the cable anchor's composite nodes to the winch (the same way you connect outputs through the winch to the Mag all to make it operational)
3. Place the second piece from the separate workshop upload into your ship and connect the composite from the winch to the controller.
You should then be able to use the Mag all "Connected" output from your anchor with the Part 2 microcontroller's output.
You can use this for other signals coming from your winch related devices too, I just felt like the Mag all issue was more relevant.
