SWR RSDE 4-axle Locomotive - #334 - Long Hood Fo
Just a 4 Axle Diesel Electric Locomotive I made to travel to wherever and haul freight or passengers or shunting.
This is the same locomotive as #333 with both based off the same locomotive, but this is set up to run long hood forward.
Based Off primarily the ALCO RS-2 and similar locomotives with some minor artistic changes.
(S.W.R stands for Storm Works Rail)
Features:
- Full heated cab with and easy to learn and use controls.
- Individual locomotive Brakes and Train Brake system I made.
- Multiple Unit system allowing you to connect multiple locomotives for more power.
- Basic remote track switching controls.
- Basic radio for communication.
- Controls for front and rear lights and heaters along with horn and bell.
- Alternating ditch light mode that is synchronised with the bell.
- Single throttle control for engines and traction motors
- A 6282L fuel tank.
Important Thinks to Note:
- To start the engine you need to go engine controls just by the front cab door, and and find the breakers and turn them all on to get power to the controls. Turn on the key for Aux Systems and Pumps for the engine, set throttle to 0.25+ to start then push starter.
- Throttle needs to be above 0.35 To start moving and under 0.35 before you change gears.
- Updated with a Multiple Unit system allowing you to connect multiple locomotives for more power. Instructions for use just find cables and plug into the locomotive and turn it on and then set the controls to 0. (Cables are in a hatch opposite side of the engine controls.)
- Due to this being a high hood there is slightly reduced visibility.
Kinda just something I made for fun so let me know if anything needs to be updated or fixed.
Please don't re upload this or modify it and re upload it as your own.
Also leave any bugs you find in the comments and will make sure to fix them asap.
