[b]Description[/b]
[b]Info[/b]
This plane is mainly useful for exploration and transportation, and it has altitude hold/autopilot to help with that.
[b]Features[/b]
[b]Autopilot[/b]
[b]Altitude Hold[/b]
Roll Stabilizer
High Gear
Top Speed of 200+ MPH (~170 kts)
[b]Generally fun to fly[/b]
[b]Instructions[/b]
[b]Startup[/b]
To start, turn the Engine ON key. To taxi, increase the throttle by just a little bit.
From here, ease the throttle in and be careful when attempting to takeoff. You don’t want to tip forward and destroy the propeller. If this does happen, the plane can still fly somewhat with at least 1 blade and in High Gear.
[b]Landing and Shutdown[/b]
To land, throttle down appropriately and gently land it on a medium sized airstrip, hold down the landing brakes, and then turn on the parking brake.
[b]Information[/b]
Don’t stay in High gear too long or the engine may overheat.
The buttons for activating autopilot and altitude hold are in the display system and autopilot can only be activated while altitude hold is enabled.
All the microcontrollers and designs are my design. Use with credit.
