How to start:
> Switch the fuel valve levers
> Switch on the fuses (CB1, CB2)
> Turn on the "Control" key
> Set the engine power to 100% using the "Engine Power" throttle
> Hold the "Starter" button for 3 seconds
How to shut down:
> Disconnect all connected cables (electricity and fuel)
> Close the fuel valves
> Wait for the engines to automatically shut down
> Set the power to 0% using the "Engine Power" throttle
> Turn off the "Control" key
> Turn off the fuses (CB1, CB1)
How to transport:
> Make sure all cables outside the container have been disconnected.
> Engines should be turned off.
> Fuel valves should be closed.
> Circuit breakers should be turned off.
> Prepare a vehicle large enough to lift the container (vehicle not included (yet)).
> Connect the container to the vehicle using ropes or connectors.
> To disconnect the container connected to the connectors, go to the panel next to the container.
> Turn the key.
> Press the button under the key twice.
Recommendations:
> Refuel with the engine off.
> Do not exceed the factory engine speed; overheating may occur because the cooling system is designed for a specific speed.
> Do not discharge the batteries. They will not be rechargeable if both batteries are discharged.
> Do not use in dusty air; this may damage the engines.
