Description
Input 1: Engine Cylinder -- Reads a cylinder from the engine you're wanting to cool off, connect this to any cylinder on the crankshaft.
input 2: Manually Enable -- Choose to manually enable the pumps incase you don't want it reaching the controller's set engagement temperature.
Output 3: Radiators / Pumps -- Connect to all pumps / radiators that cool the engine off.
Click on the Controller ->
A:
Configure the, "Enable Pumps at ...(C*)" to change what temperature of the engine's cylinder(s) will engage the coolant system.
B:
Configure the, "Temperature to Disable [Recommended 15(C)]" to change, at what, temperature the coolant system will turn off / disable after the engine hits the designated temperature you've set it to.
