DAMEN multipurpose work tug
🛠️ Ship Overview
[list]
[*] [b]Name:[/b] Damen Multi Cat 1004
[*] [b]Type:[/b] Multi-purpose workboat
[*] [b]Purpose:[/b] Anchor handling, towing, dredge support, coastal operations
[*] [b]Powerplant:[/b] High Horsepower Diesel engine
[*] [b]Navigation:[/b] Equipped with radar
[*] Length: ~10.4m (34.1 ft)
[*] Beam: ~4.6m (15.1 ft)
[*] Draught: ~1.5m (4.9 ft)
[*] Propulsion: single screw with single rudder configuration
[/list]
[hr]
🎮 Controls & Operation
Control Element
Function
[b]W / S Keys[/b]
Clutch control (forward/reverse engagement)
[b]1 Key[/b]
Reverse gear
[b]2 Key[/b]
Magnetic anchors (Mag Alls)
[b]3 Key[/b]
Heading hold
[b]5 Key[/b]
Navigation lights
[b]6 Key[/b]
Emergency bilge pumps
[b]Right of Helm[/b]
Engine throttle
[b]Left of Helm[/b]
Start key & higher engine idle
[b]Crane Controls[/b]
[b]W/S[/b]
Arm up/down
[b]A/D[/b]
Rotate
[b]Left/Right[/b]
Arm extend
[b]Up/Down[/b]
Winch length
[b]3 Key[/b]
Winch function
[hr]
🚀 Startup Procedure
[list]
[*] Go to the bridge and turn the [b]Start Key[/b] (left side).
[*] Use [b]Throttle[/b] (right side of helm) to control engine.
[*] Engage clutch with [b]W/S keys[/b] to begin movement.
[/list]
[hr]
📜 Build History & Notes
this Multi Cat is in Stormworks to match the real Damen 1004 as closely as possible.
This build is part of my ongoing effort to bring real-world vessels into Stormworks with high fidelity and operational realism. Hope you enjoy commanding this little beast as much as I enjoyed building it.
[hr]
🛠️ Created by Hunt
If you enjoy this build, feel free to leave a thumbs up or comment.
crane used [url=https://steamcommunity.com/sharedfiles/filedetails/?id=2973235954]https://steamcommunity.com/sharedfiles/filedetails/?id=2973235954[/url]
