Rescue Buzzard
Description
My go to vtol from my career mode, used for rescue missions. Designed with career mode and first person in mind.
In airplane mode it brings you fast across the map. Fuel capacity is more than enough for any mission.
In helicopter mode you hoist people from dangerous situations with ease, using the 4 person harness, controllable from inside the vehicle, inside the harness or via a remote controller on channel 7.
The vtol has an extendable pole that sucks up water out of the ocean, so you can use the fire hose to easily extinguish fires.
It has a passenger capacity of 11 people + 2 pilots that can each control the vehicle out of their seat.
Features
- 155 knots top speed
- 4 person harness (3 control modes)
- gps autopilot
- gps position hold
- altitude hold
- fire hose
- 2 medical beds
- map
- radar
- transponder locator
- lighting inside and outside
- more than enough equipment
- vtol modes: helicopter and plane
- retractable landing gear
- two diesel engines
How to use
Startup
1. turn on the key
2. push both throttle levers full throttle
3. (open the rear door and retract the harness)
4. fly in helicopter mode
Airplane mode
1. make sure both throttle levers are full throttle
2. press the airplane mode button
Onboard systems
[b] Lights [/b]
Types of lights: interior, strobe, beacon, spotlight, navigation
All controllable with the cockpit switches
[b] Harness [/b]
Control modes: harness, remote, cabin
[b] map/radar [/b]
Switch between map and radar with the buttons on the screen.
[b] Transponder locator [/b]
When activated using the switch, a circle will be drawn on the map at the place you where the closest to the target.
[b] autopilot, position hold, altitude hold [/b]
Put the gps coördinates in the keypad and press the autopilot button to fly to the location in the current flight mode.
Put the desired altitude (m) in the second keypad and press the altitude hold button to fly to the target altitude.
Press the position hold button (only available in helicopter mode) to stay at the current position. It is recommended to manually start hovering first before activating position hold.
[b] It is recommended to not use any of the auto-modes when switching flight mode. [/b]
Check out my other SAR vehicles:
[url=https://steamcommunity.com/sharedfiles/filedetails/?id=3343619338]https://steamcommunity.com/sharedfiles/filedetails/?id=3343619338[/url]
Please ask for permission before posting your modified version of this vehicle.
[b] Feel free to message me if you found a problem or have a question. [/b]
