RYTAK Ultra-Light SAR Helicpoter
~ Made by RYTAK, a fictional Canadian SAR company ~
~ Description ~
The RYTAK Ultralight is a small, light, and cheap SAR helicopter designed for multipurpose all-weather roles. Its ease of use and single-pilot operation make it a simple yet useful helicopter. Its features, such as altitude hold, position hold, and remote harness operation, make it a breeze for any single operator to use.
~ Controls ~
[W/S] - Pitch
[A/D] - Roll
[Left/Right] - Yaw
[Up/Down] - Collective
[1] - Look controls - allows the pilot to control yaw and collective by looking
[2] - Altitude hold - enables the autopilot to hold the helicopter's current altitude
[3] - Position hold - enables the autopilot to hold the helicopter's current GPS coordinates
[4] - Cruise mode - enables the autopilot to pitch the helicopter to full speed, wherever it is pointing
[5] - Platforms - extends the harness platforms
[6] - Flare - launches 1 of 4 illumination flares
~ Remote Harness ~
Radio frequency - 3
[1] - Down
[2] - Up
~ Extras ~
When exiting the pilot seat, you MUST grab one of the handles on the landing struts. Without grabbing one, your character will fly off the side of the helicopter. You also might need to crouch in order to get under the extra gauges.
Do NOT engage position hold while at full speed — the helicopter will lose control and crash.
Feel free to report any issues you find in the comments of this post.
Total time spent: ~10 hours
