this is mk1 of the artic explorer series
(i know arctic is spelt wrong its on purpose )
This train does what its name says its for exploring the arctic it has the capability to launch a ATV out the side it also has a opening rear for easy engine maintenance. It has all the equipment you will need.
TO START
Its very easy to start up artic explorer mk1
First turn on lights and heaters as needed
Then turn on gen cooling fans
Then throttle up the gen and press the starter
When the gens have started up increase the clutch so it powers the generators
Then you can dive by increasing the electric motor throttle
TO LAUNCH ATV
Again its very simple to launch the ATV
First you will disconnect the ropes on the front and back of the ATV
Then you have to open the door
Once opened just push it out if needed
Then you can lower the winches to lower the ATV down
Once at the bottom disconnect the winches and drive away
this is mk1 of the artic explorer series there will be more upgraded versions, say in comments any suggestions to add
credits:
BlowFish53 for the ATV
Marmor1 for the constant off signal micro controller
SeaWeed for the 2x3 weather screen
Incendiary Moose for the RGB light switch
Mr Lennyn for the 1x2 weather screen
sorry if not properly credited this is my first steam workshop upload
