LHA-6 USS America center section (Part Number 2)
This is the Stern section of the 1:1 scale LHA-6 USS America.
You will need to use the spawner to get it in game and also a large (Modified workbench) mine is 200M L/W/H.
Currently working to get the decks in and the machinery where its supposed to be.
The most current iteration added ladders to all the decks.
Currently installed:
Correct Flight deck, with lowering nets (rails) marking lines and lighting.
(There is one area where I use alternating white and yellow stripes vice alternating white and red, I haven't decided if I am going to correct that or not.)
Weapons are correct, in that there is a MK-38 20MM gun on Port and Starboard Sides.
Radar locations are correct. but not working, visual only at the point.
Major hull doors are correct
Elevator is correct, size is not available in what I could find, but its very close in location and size based on extrapolations from photos and reference objects.
Decks: The correct number of decks are in place.
The Decks will generally contain what they are supposed to from what I can find from available documentation, but the layout of them is entirely my fabrication.
Note: Connectivity between the same deck fore and aft are truncated between sections because of requiring three sections due to STORMWORKS length of build limitations. Each section is connected with doors however they do not in any way reflect reality of the ship, the hanger deck is also truncated into sections when they would normally be connected.
