Lima 2_12_6 monarch with TCP
The Monarch is based on a concept lima had made using a 2-12-6 wheel layout but was never built.
The monarch contains:
realistic air brakes (created by me, the brakes take time to release they range from -0.6 to 120.0 and when the train is ready the tender may still be letting off its brakes)
TCP compatibility (the TCP systems were developed by the Stormworks Rail Committee)
easy to read tender levels that are color coded to see the water better
How to start:
1.go in the cab and activate master (need to hold till indicator lights up then you can lock it with the latch below)
2. in the center of the cab, above the firebox activate systems
3. use the manual pump labeled less air brakes and monitor the indicator tank dial to its left (able to be lapped between .21 and 2.9 on the instructor tank, releases below 0.2 in the instructor tank and adds brakes when over 3 on the instructor tank)
4. once the brakes on the dial on the left side of the cab starts going into the negative start on the throttle and water injector. the dial will stop around -0.6
5. go to the monitor and click on external lights and then click head (these will activate the head lights and tail lights of the locomotive and will automatically flip when put in reverse)
6. now you can go any where on rails( due to it being long you may need to increase throttle if you are going slow in order to not get stuck when doing task like shunting on a curve
the tender has 999 coal and around 4000L water with the locomotive holding 300L
A few enclose pipes might brake the shape of the locomotive (in 2 spots) due to it originally being enclosed wedge pipes from thale's mod.
top speed is about 100kph with no load
