Transperth B-Series Train [Both Cars]
Transperth B-Series Train
The B-series trains are a class of electric multiple unit built by Downer Rail in Maryborough, Queensland for Transperth between 2004 and 2019.
------------------------------------------------------------------------------------------------------
1. Activate the Terminal By turning the key, if the conflicting drive commands light comes on, make sure you have de-activated the other Terminals connected to the train, this alarm will also go off if you try and use a train with anything connected to the front Coupling
2. Connect all train cars. the middle train cars are always able to connect, but the ends must be switched on at the terminal. to disconnect simply turn off the connection switches.
3. Throttle up. the throttle goes straight to the wheels unless the terminal is deactivated. to brake simply turn the throttle negative, and it will brake. *NOTE only end cars have motors, all cars have brakes.
4. Open doors, to do so, you must switch on open doors to the side you would like to open. *NOTE only doors that have been requested to open will open. to request a door to open press the button on the ouside or inside of the train near the door.
------------------------------------------------------------------------------------------------------
THIS IS BOTH CARS, MAKE SURE TO SPAWN THEM IN A HANGAR OR MODDED WORKBENCH THEY ARE TOO LARGE TO FIT IN A NORMAL TRAIN WORKBENCH
To use this as a rear/end car, use the selection tool to flip it, and it should work as an end car
------------------------------------------------------------------------------------------------------
Thanks to oskarotterr for insparation for the front of the train, Other than the basic frame of the front, the entire train is original based on what details I could Gather From the internet and riding the train in person.
