Nessus NQ-14C Egret MultiDrone
Description
The Nessus NQ-14C Egret MultiDrone is a short range transverse rotor multi-use utility drone built by the fictional Nessus Corporation. When operated with from a remote control or intermediate controlling station it can be used to effortlessly carry shipping containers, fight fires, clear roads, trawl for fish, and conduct vessel inspections either organically or with one of its many modular attachments.
Operational Instructions
The Egret is operated on Radio Frequency 3, transmits battery level, fuel level, altitude, and engine temperature on Radio Frequency 4, and transmits organic video data on Radio Frequency 8.
[b] While operating on Radio Frequency 3: [/b] [list]
[*] 1: Holds current altitude.
[*] 2: Activates CSOaR ( Camera Shift and Organic Retreival) function which shifts the operating view to the downward onboard camera and activates talon like mag alls for lifting objects.
[*] 3: Activates forward facing spotlight.
[*] 4: Releases equipped module if Enable Release Module flipswitch on tail is active.
[*] 5: Conducts equipped module action (function varies depending on attached module).
[/list]
Statistics
[list]
[*] Max Speed – 84 KTS
[*] Endurance – ~45 mins
[*] Base Cost – $13,630
[*] Lift Capacity – 180 Kg
[*] Non-inverted flight controls
[/list]
Default Version:
[list]
[*] No Modules pre-equipped
[/list]
Startup Guide:
[list]
[*] Retrieve remote control hidden on the right side fuselage just in front of the rotor
[*] Set remote control to Radio Frequency 3
[*] Turn Engine Ignition key
[/list]
Known Issues:
[list]
[*] Drone’s engine will combust after 45 minutes of continuous use.
[/list]
Credits:
Engine ECU by [url=https://steamcommunity.com/sharedfiles/filedetails/?id=3650525285] AVUMP [/url]
Drone Controller by [url=https://steamcommunity.com/sharedfiles/filedetails/?id=2593033911&searchtext=drone+controller] SansExe [/url]
Altitude Hold System by [url=https://steamcommunity.com/sharedfiles/filedetails/?id=1622747676&searchtext=Improved+Helicopter+Al] Momox[/url]
Remote Controller Settings by [url=https://steamcommunity.com/sharedfiles/filedetails/?id=2242140212&searchtext=Remote+Controller+Sett] Struner [/url]
