PROJECT AURORA [ C802A1 Mammoth ]
Info
[b] Model name: [/b] C802A1 Mammoth
[b] MANUFACTURER: [/b] Pandemonium Initiative
[b] CLASSIFICATION: [/b] Heavy lift cargo Mech/mobile rig
[b] Cost [/b] $40000
[b] Parameters [/b] Mass 80262, Size 17.75m by 32.75m and variable 9m tall
The [b] C802A1 Mammoth [/b] is the first nuclear powered all terrain cargo Mech built for civilian use, whether it be land or sea the mammoth can transfer it while also hauling any cargo, [b] A background check is required before purchasing, we are not responsible for any damage caused by Mammoth [/b]
Features
Movement
Mammoths legs are equipped with terrain adapterment allowing it to traverse uneven terrain easier, the legs themselves can Propel Mammoth up to 15 miles an hour(astonishing I know) also equipped with water jets to allow traversal over rivers or oceans
cargo
The internal cargo bay on mammoth is 12.75m by 6.5m and 3.50m tall easily allowing it to comfortably fit two cargo containers internally and equipped with a internal crane allowing for the loading and unloading of cargo, the helipad can either be used to store a small to medium aircraft or can be loaded up with 4 cargo containers ( you could also stack more on top of the containers ) and last but not least the two built-in fuel tanks with a total capacity of 41000
reactor
the built-in nuclear reactor is fully automatic and equipped with three different Power modes switchable from the reactor control room, from one to three it goes from quiet to loudest and least power to most power, mode one should be enough to power most systems at the same time but you may need to increase the power level if under heavy strain ( also for max speed out of the water jets it needs to be at least in mode 2 )
Operating/Starting
TDR Start the reactor then enable the mode of movement you want to use
The entry hatch is located on the bottom indicated by black and yellow stripes or on the top connected to the helipad, once inside you first need to head to the back of the vehicle through the cargo bay and start the reactor this is as simple as just pressing the start button in the reactor control room everything else should be handled automatically then head to the command room in the front on the second floor, [b] land control [/b] for land control you must enable legs located on the left panel you can also optionally enable terrain adapterment the Speed control will adjust the walking speed ( 0 - 1 ) it is then just WASD control [b](it isn't unusual if you are going at high speeds or over rough Terrain for the legs to get damaged they shouldn't get damaged it enough to matter though) water control [/b]
For water control you must enable the water jets on the left panel then use speed control to adjust your speed, there are also the water lifters to give extra buoyancy in water
Notes
The system's on mammoth aren't perfect but they work decently well and no bugs were used if you find any problems or have any suggestions let me know
also you can partially fill the internal cargo bay by about half to sink in water there are no oxygen systems but you can do it anyways there is also the internal pump but it is Slow to drain
As for the crane it's operation is pretty simple you do have to drag cargo containers in by moving the crane to get them inside
And despite how big the Helly pad is don't put too much weight on it on water and make sure to tie anything down
Credits
[url=https://steamcommunity.com/sharedfiles/filedetails/?id=3277846721&searchtext=map]https://steamcommunity.com/sharedfiles/filedetails/?id=3277846721&searchtext=map[/url]
Please do not reupload, if you want to upload a modified version make sure it is sufficiently different from the original and give credit to the original. You're free to use any of the components from this as long as you give credit,
