Mk.I Torpedo-to-missile connector
A Tomahawk-like connector for YOUR missiles!
How to use:
1. Connect your missile to the connector
2. Connect the "Launch" output from the bottom microcontroller to the hardpoint attachment
3. Configure Depth Stroke and Jump Height settings in the Azimuth MM (-3 = maintains 3m below sea level before jumping; the higher the Jump Height and lower the depth stroke, the steeper the jump angle
(optional) 4. Set up Bearing Override (connector will only jump after turning to the desired angle)
4.1. Connect your composite signal to the Azimuth MM (reminder: you'll need to use the hardpoint's composite transfer mechanic for that)
4.2. Select the microcontroller and edit it, then connect the module in the top-left like in the picture along the red line if your bearing is outputted as a raw compass signal and blue if it's outputted as a 360-degree output
Based on the Mk.I SA-D torpedo. Use in any of your builds without credit.
Feel free to report any bugs in the comments/DMs, I'll try to fix them ASAP
