SAR Sikorsky S92 Fire Rescue Pod
[img]https://i.imgur.com/uc8KqzT.png[/img]
[b]Join My Disocrd here: [url=https://steamcommunity.com/linkfilter/?u=https%3A%2F%2Fdiscord.gg%2F8GBAke3n5c]https://discord.gg/8GBAke3n5c[/url][/b]
[img]https://i.imgur.com/OqbqLVW.png[/img]
[img]https://i.imgur.com/T28qDrv.png[/img]
This removable pod is specifically designed to seamlessly integrate with the Sikorsky S-92, enhancing its firefighting capabilities. The pod comfortably attaches to the helicopter and features a large water tank that can be deployed to extinguish fires efficiently. Built to work in harmony with the S-92's existing systems, this addition allows for smooth operation during missions. The tank can be refilled by either dipping it into a water source or connecting to an external tank via a hose, providing flexibility and convenience. This pod transforms the Sikorsky S-92 into a powerful tool for combating fires with ease.
[img]https://i.imgur.com/NlQ9sbl.png[/img]
-Adds 2.7k L Water tank and firefighting capability to the craft
- to connect this to your build you have to use the copy and past tool and line it up with the connectors on the bottom of the fuselage getting it as close as possible without deleting anything.
- for tank to correctly be used you MUST connect the fuel port on the external tanks left side to the main helicopters refuel port which should be right above it.
- To disconnect the tank you have to be sitting in the pilots seat and press hotkey 6 after ensuring the hose is not still connected
- to use the pods features navigate to the pilots seat and directly next to your right knee you will see drop and refill buttons each does as expected however to refill you must "Dunk" the helicopters belly into the water until full, you can get the reading of water left in tank via the dial to the far right of all the the displays by the pilot control buttons.
[b]Specifics[/b]
- Can dump for about 3 minutes before empty
- takes about 4 minuets to fill
