Disair hiper train (400+kmph) (not a plane)
1. Basic Preparation
Release the handbrake with the space key.
Turn on the pumps.
The parking engine control panel is located next to the seat.
The jet engine control panel is located on the right side.
2. Engine Start-Up
Set the clutch to 23.
Hold the starter until the RPM reaches 3.
Push the throttle to maximum.
Gently engage the clutch and let the train gain speed.
Set the clutch to 0,06 .
3. Jet Engine Operation
Turn the key to activate the jet engine.
Press the jet activation button.
Enter the required values on the control panel for optimal performance.
4. Refueling
Use the selector on the side of the train to choose which tank to fill.
The first tank is for diesel.
The second tank is for jet fuel.
Start-up steps (each point is one sentence):
Release the handbrake with the space key.
Turn on the pumps.
Set the throttle to about 23.
Hold the starter until the RPM reaches 3.
Push the throttle to maximum.
Set the clutch to 0,06 .
Activate the jet engine by turning the key, pressing the button, and entering the required values.
SLOW DOWN BEFORE CURVES!!
The parking engine control panel is next to the seat, and the jet control panel is on the right side.
