IT-40 industrial and mining tractor
Overview
UPDATE: I originally forgot to add a hopper for carrying ore for Alistair's challenge so I have now added one even though it isn't shown in the screenshots
[b] The IT-40 is medium-sized industrial tractor that can be used for mining and other industrial applications. It comes equipped for drilling but It can use many different attachments (coming soon).
[i] Note: Do NOT use infinite electric [/i]
Specs:
Max speed
35 KPH (20 MPH)
Cost
$31,148
Gears
4
Gear ranges
4
total number of gear/range combinations
16
Operation:
[b] To start the tractor, turn the key on, to go forward, select any gear or range and press the throttle, to go backward simply press the reverse button, the tractor can reverse in any gear or range, no downshifting is needed. To start drilling, first make sure the tractor is stopped, then find the PTO(power take off) switch and turn it on, this allows the engine to transmit power to the generator in back, which will then send electricity to the drill in the front, to stop the drill, turn the PTO off. Up/down raises the drill, left/right rotates it, 5 and 6 raise and lower the generator in the back[/b]
Attachments:
[b] The tractor by default comes equipped with a drill and a generator to power it, but they aren't permanently attached. To remove the drill, disconnect the cable and press "release front implement" to release it. To remove the generator, disconnect the cable, disconnect the winch, then press "release top links" "release bottom links" and "release PTO". If any of this seems a bit confusing, I plan on posting some video tutorials in the future. Note that as of right now there are no other attachments available.[/b]
do NOT re-upload as your own creation!
[/b]
