Tired of looking for a Radar Microcontroller that actually met my requirements, I decided to create my own.
⭐ Preview Build Available! ⭐
I have also uploaded a separate preview build to the Workshop so you can test it immediately before incorporating it into your final project.
[b]Link to the Preview Build:[/b] [url=https://steamcommunity.com/sharedfiles/filedetails/?id=3618398969]Click here![/url]
Features
[list]
[*] [b]Touchscreen Interaction:[/b] Full control via monitor.
[*] [b]Audio Feedback:[/b] Sounds for radar "sweep" rotation and target detection.
[*] [b]Mute Button:[/b] Toggle sounds directly from the screen.
[*] [b]ON/OFF Control:[/b] Activate or deactivate the system via touch.
[*] [b]Adjustable Range:[/b] Presets from 500m to 5000m (500m increments).
[*] [b]Visual Feedback:[/b] Current distance setting displayed on screen.
[/list]
Compatibility & Info
[list]
[*] Designed for [b]2x2 Monitors[/b] (other sizes not tested).
[*] For best results, set Radar FOV (X and Y) to around [b]0.6[/b].
[/list]
Recommended Sound Settings
To get the intended effect, configure your buzzers as follows:
[list]
[*] [b]Sweep Buzzer:[/b] "Beep 1" (Pitch: 60%)
[*] [b]Target Buzzer:[/b] "Warning 2" (Pitch: 80%)
[/list]
Installation Guide
[b]1. Component Settings - [u]Basic Radar[/u] (Select the Radar block):[/b]
[list]
[*] Sweep Mode: [b]Clockwise[/b]
[*] Sweep Speed: [b]100%[/b]
[*] Sweep Limit: [b]0.01[/b]
[*] Pitch Angle: [b]0[/b]
[*] FOV X: [b]0.6[/b]
[*] FOV Y: [b]0.6[/b]
[/list]
[b]2. Wiring (Logic):[/b]
[list]
[*] Connect [b]Radar Rotation[/b] (Number) -> MC "Radar Rotation"
[*] Connect [b]Radar Activate[/b] (Bool) -> MC "ON/OFF Radar"
[*] Connect [b]Radar Data[/b] (Composite) -> MC "Radar Composite"
[*] Connect [b]Touch Output[/b] (Composite) -> MC "Touch"
[*] Connect [b]Video Signal[/b] (Video) -> MC "Display"
[*] Connect [b]Buzzers[/b] to "Buzzer Sweep" and "Buzzer Target" nodes.
[*] [i]Don't forget to connect Electricity to the Radar, Monitor, and Buzzers![/i]
[/list]
Credit
[b]If you incorporate this microcontroller into a creation that you upload to the Steam Workshop, please provide a direct link back to this original item page in your description.[/b]
If you find any bugs or have suggestions, let me know in the comments!
