Ridgeboar MRV3 Vehicle Recovery Module
Adds an Vehicle Recovery module for the Ridgeboar MRV3.
Features:
- Crane
- Flatbed for towing
- Large winch
How to use the Flatbed:
There are 3 buttons for extending and retracting the winch:
Extend
Retract
Retract All (note: you need to turn this off after it has retracted in order to extend it again)
To hook the winch up, turn the Mag button on and take the magnet to what you need to hook up (note: its on by default so it doesnt fly around while driving, so first you need to turn it off, then take it off and then you can turn it on again)
The monitor is on by default. It shows how long your cable from the winch is. If you want to turn it off, press the button next to it.
Turn up flatbed controls lever to lower the flatbed
Turn down flatbed controls lever to get the flatbed back up
How to use the Crane:
The crane will automatically fold itself after spawning to take up less space. It might cause the flatbed to shake a bit, but thats harmless and perfectly ok.
I recommend using the crane in 3rd person.
To unfold the crane, press 1. (YOU HAVE TO DO THIS FIRST)
To move the first arm, press w or s.
To move the second arm, press arrowup or arrowdown.
To extend the cable, press arrowright.
To retract the cable, press arrowleft.
To activate the magnet, press 2.
To fold back the crane, press 1 again. (dw it will fold back up automatically)
PS: I know its not the best, but ive tried my best. Also i was making it from 11pm to 7am non stop, so any review would be great... Ill go sleep now
