The TC-145 is a small/medium size personnel transport helicopter designed with career mode in mind.
my friend originaly made this since i have the inability to make stuff, but today i figured out using my last 8 braincels how to use data and guns. so i made this from the TC-145 its crappy but it flys and it works, also rockets dont fire one at a time....
-Freddie
uh all credits for stuff are from the main helicopter soo ima jus copy and past most info
Here is some information about it:
Cost ≈ $33150
Weight ≈ 2278 mass units
Engine: 11 cylinder diesel engine
This is the first helicopter of the Talasmon Co. (founded by me and Freddie)
It is designed and built by me. Freddie gave some ideas and helped in testing.
Credits:
https://steamcommunity.com/sharedfiles/filedetails/?id=2830904924 Map
https://steamcommunity.com/sharedfiles/filedetails/?id=2429720473 Artifical Horizon
https://steamcommunity.com/sharedfiles/filedetails/?id=2774712393 1x1 Transponder Locator https://steamcommunity.com/sharedfiles/filedetails/?id=2037028237 1x1 Fuel Consumption
https://steamcommunity.com/sharedfiles/filedetails/?id=2234755549 Autopilot
https://steamcommunity.com/sharedfiles/filedetails/?id=2818684806 Yaw stabilizer
https://steamcommunity.com/sharedfiles/filedetails/?id=2871063674 ECU (I modified it to suit my needs but this is the base I used for it)
Refueling:
The refueling port can be found on the right side of the helicopter under the sliding door.
What to do if rotor is broken?:
You can repair it with a welding torch like any other person, or if you have enough electricity, you can use the "Rotor Welder" on the helicopter. The button for that is next to the keypad.
What to do if no electricity?: I recommend you just spawn it again or connect the electrical cable anchor to something with electricity, but if neither is possible, there is a hand crank generator hidden on top of the tail rotor. It doesn't do much but it's there.
Startup:
- Enter helicopter (important)
- Turn the gyro on for some stability assist (optional)
- Press and hold the "Engine IGN" key button for approximately 1 second
- Fly (optional)
Autopilot:
The autopilot can be enabled by first pressing "Autopilot On" on the center console. That also works as a position hold. After the autopilot has been enabled, you can input the coordinates to you desired location in the keypad on top of the middle console. Keep in mind that the altitude should be manually changed before use to somewhere where if there is nothing in the path to hit. When turning the autopilot off while in motion, the helicopter might continue moving forwards and even down for a little bit of time, so be ready to manually avoid crashing.
(link to the autopilot below)
